12-75V Input to 10V Output DC-DC Buck Converter

12-75V Input to 10V Output DC-DC Buck Converter

This is a versatile synchronous Buck DC/DC converter built using the LM5007 chip. It operates with an input voltage range 12V to 75VDC, and provides 10V/250mA output. The regulator can provide load current up to 400mA, but it is advisable to draw only 250mA due to the small thermal...

Continue Reading
1.061
Views
0 Comments
12V Step-Up DC-DC Converter from 1.8V to 5V Input

12V Step-Up DC-DC Converter from 1.8V to 5V Input

This is a DC/DC converter that combines a traditional voltage feedback loop and a unique current feedback loop to operate as a constant-current, constant-voltage source. The project has been designed using the LT1618 chip. The board provides 12V/150mA output, from input supply 1.8V to...

Continue Reading
1.090
Views
0 Comments
Universal Input AC/DC Switching Buck Regulator – 85V -265V AC Input – 5V/150mA DC Output

Universal Input AC/DC Switching Buck Regulator – 85V -265V AC Input – 5V/150mA DC Output

The project presented here is a universal input AC/DC switching buck regulator with ultra-low standby power that is capable of delivering up to 2.5W output power. The RAA223012 chip is the heart of the project which combines constant off-time control for heavy load and Pulse Frequency...

Continue Reading
1.230
Views
0 Comments
Step Up DC-DC Converter 12V Output – 5V Input

Step Up DC-DC Converter 12V Output – 5V Input

This high-performance, fixed frequency, current-mode PWM step-up DC/DC converter efficiently produces 12V from input voltages between 3.6V to 5.5V. The project is built using the PAM2423 chip, which includes an integrated power MOSFET that supports a peak current of up to 5.5A.  The...

Continue Reading
1.252
Views
0 Comments
9V @ 45mA Boost Converter Output with Input 2.1V to 5.5V

9V @ 45mA Boost Converter Output with Input 2.1V to 5.5V

The project shown here is a boost converter that provides 9V DC output from 2.1V to 5.5V input. It is a good choice for battery-operated devices where the converter can be connected to 2x 1.5V, 3 x 1.5V Battery, 1 x Li-ion, 2 x NICAD, 2 x NIMH, and provide 9V Output. The board is...

Continue Reading
1.102
Views
0 Comments
3.3V-5A Output DC-DC Converter with 10 to 24V Input

3.3V-5A Output DC-DC Converter with 10 to 24V Input

The project published here is a synchronous step-down DC/DC converter based on the RT7258 chip. The chip has integrated high-side internal power MOSFET and gate driver for a low-side external power MOSFET. The board delivers 3.3V DC - 5A output current from 10V to 24V input supply....

Continue Reading
1.143
Views
0 Comments
5V – 4A Buck Converter using NR110E

5V – 4A Buck Converter using NR110E

This powerful buck converter can efficiently produce 5 V@4A with an input voltage between 7V to 31V. The project is built using the NR110E chip from Sanken Semiconductor. The IC integrates the power MOSFET. With current mode control, ultra-low ESR capacitors, such as ceramic...

Continue Reading
1.168
Views
0 Comments
Phase-Shifted Full-Bridge PWM Controller Module – LM5046 Breakout Board

Phase-Shifted Full-Bridge PWM Controller Module – LM5046 Breakout Board

This is a Phase-Shifted Full-Bridge PWM LM5046 carrier board that contains all of the features necessary to implement a phase-shifted full-bridge topology power converter. All inputs and outputs pins are accessible using the header connector. High efficiency DC-DC converter can be...

Continue Reading
1.652
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives