Single Key Touch Sensor using LM2907
ControlTop Stories

Single Key Touch Sensor using LM2907

This is a single key device featuring a touch ON (Momentary) output. The project is built using the LM2907 chip. The board provides stable sensing and has a wide working power supply range 5V to 12V DC and consumes 20mA. D1 power LED, D2 function LED. Touch sensors are used in many...

Continue Reading
1.144
Views
0 Comments
Single Joystick Remote Control Transmitter using NRF24L01 – Arduino Compatible
Control

Single Joystick Remote Control Transmitter using NRF24L01 – Arduino Compatible

This is an Arduino compatible open-source hardware that includes 1 x joystick, NRF24L01 RF module, Atmega328D microcontroller, 3.3V regulator, power LED, function LED, and other required components. This board can be used for the development of various applications such as Gaming,...

Continue Reading
2.003
Views
0 Comments
Dual Joystick RF Remote Transmitter with NRF24L01 RF module – 2 Joystick Control
Control

Dual Joystick RF Remote Transmitter with NRF24L01 RF module – 2 Joystick Control

This is an Arduino compatible open-source hardware that includes 2 x Joysticks, NRF24L01 RF module, Atmega328 microcontroller, 3.3V regulator, power LED, function LED, Arduino programming connector, and other required components. This board can be used for the development of various...

Continue Reading
1.885
Views
0 Comments
Encoder-Controlled Potentiometer
Control

Encoder-Controlled Potentiometer

Author: Marian Hryntsiv, Documentation Engineer, Dialog Semiconductor Introduction There is a variety of applications where a mechanical potentiometer is part of a user control interface. These mechanical potentiometers can be changed to more updated and reliable encoder-controlled...

Continue Reading
2.689
Views
0 Comments
BIGTREETECH SKR MINI E3 V2.0 32 Bit Control Board for the Ender3 Printers
Control

BIGTREETECH SKR MINI E3 V2.0 32 Bit Control Board for the Ender3 Printers

3D printer controller boards are the brains of any 3D printer. All the electrical components are interfaced with the printer motherboard. The main job of the controller is to follow the code from the 3D printer software and produce a 3D printed object. The controller receives various...

Continue Reading
2.580
Views
1 Comments
Galvanic Isolated 8 Channel High-Side Switch (0.6A per channel)
Control

Galvanic Isolated 8 Channel High-Side Switch (0.6A per channel)

This project provides 8 fully protected and isolated high-side power switches that are able to handle current up to 625 mA. An 8-bit parallel microcontroller compatible interface allows connecting the inputs directly to a microcontroller or standalone circuit system. The input interface...

Continue Reading
2.167
Views
0 Comments
Arduino Nano- Switching ON/OFF Appliances Using Infra-Red Remote (Two Channel)
ArduinoControl

Arduino Nano- Switching ON/OFF Appliances Using Infra-Red Remote (Two Channel)

The project presented here is a two-channel infrared remote ON/OFF switch that can be used to control home appliances, Lights, Fans, Water Pumps, Aquarium pumps, Ovens, Heaters, etc. This open-source project contains 2 x SSR (Solid State Relay), Arduino Nano, and TSOP1838 infrared...

Continue Reading
1.905
Views
0 Comments
Infineon Technologies EiceDRIVER™ low side driver 2ED24427N01F
Control

Infineon Technologies EiceDRIVER™ low side driver 2ED24427N01F

The 2ED24427N01F is a dual-channel ±10 A driver (typical) in a SOIC-8 package with a power pad for increased thermal efficiency The 2ED24427N01F is a dual-channel ±10 A driver (typical) in a SOIC-8 package with a power pad for increased thermal efficiency.  It includes one enable...

Continue Reading
1.727
Views
1 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives